Features
I. CH supply ODM service, this CI 243 Parallel Mirco Stepper Motor Controller is a customized motion control unit for monitoring and servo actuator of water flow etc industries.
Micro Size, 16mm*24mm*2.5mm
Embedded stepping pulse generator, adjustable frequency
ON/OFF, Reset, Direction 3-wire control
10-35V DC, 2A adjustable phase current, 16 micro-stepping
TTL Logic control
Description:
CI24302 is a high performance stepper motor controller that features micro miniature size and 2A max phase current. The size is only 16mm*24mm*2.5mm. Onboard 555 timer based stepping pulse generator unit eliminates the need for external pulse source. The pulse frequency is adjusted through an onboard potentiometer. Once the frequency is set, user only needs 2 signals to control the motor: On/off, direction. The Reset signal input can put the controller into sleep to maximum the power saving. If not needed, leave it open.
We also offer quick engineering design service to satisfy the needs of single power supply, different micro-stepping options, photo coupler isolation and embedded control system, etc.
Drawing:
| Absolute Maximum Ratings |
| Supply Voltage |
35VDC |
| Store Temperature |
-40~+125degree |
| Working Temperature |
-20~+85 degree |
| Working under environment exceeding maximum value could damage the controller |
| |
| Electrical Characteristics (Ambient Temperature 25 degree ) |
| Supply Power Voltage |
10V~35VDC |
| Motor Output Current |
Max 2A(adjustable through on-board POT) |
| Driving Mode |
PWM constant current |
| Stepping Resolution |
Full-step,half-step,quarter-step,and sixteenth-step |
| Insulation Resistance |
>100MΩ |
| Dielectric Strength |
0.5KV in one minute |
| |
| Environment Requirements |
| Cooling |
| Working Environment |
Environment |
| Temperature |
| Humidity |
| Vibration |
| Storage Temperature |
| |
| Size and Weight |
| Size |
16mm X 24mm X 2.5mm (L*W*H) |
| Weight |
0.01kg |
